Paper Mache Halloween Props - DIY - Torn Torso Body Part... Haunted Tree & Broken Leg!

Instructions to create a Torn Torso out of Paper Mache for Halloween home haunts!

... all thanks to inspiration from Martha Stewart. I watched, took notes then headed to the hardware store for some supplies. This was a huge!! project for me to undertake and by the time this and a few other projects were complete, I had ample unwanted paper mache experience. These projects were the messiest, most time consuming props I've ever made but, in the end also the most rewarding. 

I have previously written and posted the DIY instructions for all of the paper mache props on my Squidoo lens so I'm just posting the instructions for the Torn Torso... to view the haunted tree, broken leg and the three eyed martian just click here. 

This gruesome torso would look fantastic in a bloody butcher shop, kreepy kitchen or stewing pot in the graveyard!

How to Make Body Parts out of Paper Mache

Supplies needed...

To make the form - chicken wire, thin gauge wire for threading, silver tape, metal snips, white glue, newspaper, thin stake, garbage bag, gloves.

To make papier mache - newspaper (rip into thin strips), flour, water, white glue, paper towel and container.

To finish - primer sealer, paint brushes, paints in flesh tones, reds, black, blues, yellows and white(I wouldn't recommend using oil paint) to simulate blood, tears, cuts and bruising and red tissue paper.

Okay...

;) please remember this isn't an exact replica of the body!

Step 1 - Get the chicken wire, snips, thin gauge wire and gloves. Snip the sharpest tips off of the chicken wire to prevent future gouges. Wrap a good sized piece of chicken wire around a garbage bag full of newspaper (made into the general form of a torso).

Step 2 - Pull the chicken wire firmly around your form. Make a smaller waist and wider shoulders as you determine the basic shape. Be sure to leave an overlap so you can secure the joins with the wire. You will need to nip, tuck and perhaps sew on the arms, depending on how you made your form. Secure the stake to form at this stage or skip it if you wish to display differently.

Step 3 - Make at least three bones by simply cutting thin strips of chicken wire and folding them a few times. Then wrap the tape around the entire piece.

Step 4 - Get your mache paste ready, if you havne't already and keep your supplies handy in case you need to make more paste or tear more paper. Be sure to keep openings for the bones you made.

Step 5 - Do at least 4 or 5 layers of paper mache and let them dry completely. On the last last couple of layers begin building up the rib bones, collar bone, spine and any torn holes in the skin.

Step 6 - After many days your torso will be dry. At this point, wedge the bone part into the openings. Make them stick out, as though they were snapped off. Crumple up newspaper and place it tightly around the openings, to fill in the rest of the hole. Secure with tape where ever you have to.

Step 7 - Begin by painting your entire torso with a base coat of primer and let dry. Then paint the entire torso in flesh tones. Using darker colours to create the deep gashes. Yellows, browns and dark blues are great for creating bruises. Just blend, layer and build up the colours as you go along. Add lots of reds, purples and blacks for fresh blood and dried blood on the wounds. Darken deep cuts and highlight the upper most areas with a lighter shade, to create depth. You will need more than one coat of paint, so don't do any fine details until the final coat of skin is finished. Let paints have a chance to dry, even as you are building up colours. This colour palette will get muddy really quickly.

Step 8 - Grab a few pieces of red tissue paper and smoosh them up, this will give them some texture. Pour glue onto the ends of the openings, but not on the bones, then place the tissue paper onto the glue. Press gently to set in place. Push raw edges into glue or add more glue if necessary.

Step 9 - Use red paint and touch up all around the end openings and paint down any loose tissue pieces.

Step 10 - Admire your latest creation as you are now finished!! Congratulations on the making of a paper mache torso!

There are a few key tips n' things to keep in mind and they are available with the other project instructions (just click here)....and remeber that rain is not your friend with paper mached props! Be sure to protect your Halloween artwork from the elements or display them indoors only.

DIY Halloween Prop - Long Fingered Ghoul

Laying inside this makeshift wooden coffin lies a gnarly, sunken faced ghoul! Who's long, boney fingers once scraped down it's victims back. Now, laying helplessly with its arms folded over it's chest.

RIP! you poor soul...or are you just napping?!

Anything in a coffin spells terror for Halloween home haunts and with the threat of something evil coming to life it adds even more intesity. In the dark shadows of Halloween night Trick or Treaters won't know if he's dead or alive. Hide a Scare-Actor beneath the Ghoul and give it moments of movement that will have em' screaming!

The Coffin Ghoul Halloween prop was very easy to make just a little time consuming because the fingers on the ghoul are done with paper mache.

Supplies required...

- 6 large plastic bags

-  a small plastic bag for the head

-  newspaper (both whole and torn into narrow strips)

- chicken wire

- thin gauge wire

- scary mask

- tape

- paint; green, black and white 

- metal snips

- coat hanger

- one coffin

 This particular coffin was slapped together by hacking up a sheet of particle board and some scrap pieces of wood for the backing, then sprayed with leftover black and grey spray paint. Granted in the light of day it doesn't look the best, at night you'd never know it was so cheesy ;)

- paper mache; flour, water and white glue

How to make Paper Mache paste...

Add equal parts flour and water and a dollop of white glue, stir. Add more water, glue or flour as required. Prepare the paper mache paste in a large container just before you are ready to apply the strips of paper.

Visit my Squidoo page for Paper Mache Halloween Props such as a lifesize Haunted Tree, a bloody Torso, torn off leg and 3 Eyed Creature! 

Steps to Complete the Long Fingered Ghoul

Hands...

 - Grab snips and chicken wire. Snip 10 equally long strips of wire about 3-4" wide. These will be the ghouls creepy fingers. Wrap into a tube and secure with wire, poking sharp ends into tube.

- Next, snip out two long rectangles, fold each in half to form the palm. Secure with wire then attach the fingers by securing with wire. Use snips to trim the ends and lengths of fingers. Now is the time to shape the final form of the ghoul's hands.

- Create the paste in your container.
- Protect the surface you are working on.
- Get your paper strips and begin to dip them into the paste. Make sure the strips are saturated but not glopped with paste. Running them between your fingers gets off excess, then place each strip over your wire frame one at a time. Attach a long piece of wire to the wrist of each hand, used later to attach to either ends of the hanger.
- Continue building up layers until you have reached the desired thickness and appearance. Keep edges pushed down and smooth on each layer. Leave to dry. The drying process can take a long time so to speed up it up by placing in sunshine, near air flow, or heat source (safe distance, it is paper!) or a dehumidifier.
- Once completely dry, it's time to paint! Give it a few coats, allowing each to dry before doing the next one. Put your details on in the final coat. Depending on the type of paint you've used, it may need to be sealed or protected from the elements.
- Once you've created the body (see below), attach the hands to the hanger by poking through the plastic wrap and securing.
- Use a garbage bag to swaddling the ghoul, being sure to hide any parts, wire etc.



Body...

- Poke the hanger thru the bottom center of one bag then tip over and fill with scrunched up wads of newspaper, tie knot in end to close.
- Slice open the bags into a full sheet of plastic then secure it to the shoulder area with a knot around the hook and wrap it around the body to form a swaddled mummy shape. Use the tape to shape your body, wider at shoulders or not, it's your ghoul!
- Form a head and secure mask of choice and attach to the hanger.

Keep the snips and pokey ended chicken wire away from children.

Variations - originally my Ghoul had wings and was a Nasty Bat like creature! It hung upside down in one of our trees by a cord attached to the hanger that came out through the bottom of the bag. The wings were large but sadly made of cardboard and only lasted two seasons and then the rope broke...hence him now laying in the coffin. Change up the body wrap by using weed barrier it's black and cheap, switch up the masks, add viens, englarge the knuckles, make a third eye or enlarged pointed ears all while you're already all gooed up!